LLY LBZ LMM 04.5-10 RDS 68mm Duramax Turbocharger Reman

Description

The RDS 04.5-10 LLY LBZ LMM Duramax Diesel reman 68mm turbo is a stock appearing drop-in turbo. This turbo is great for a truck with an upgraded fuel system, looking to make high horsepower.

Features of the 68mm Turbo: 

• 68mm 6 blade proprietary compressor wheel
• 71mm 10 blade high flow turbine
• 100% drop in turbo
• Includes high flow vanes
• Includes both vane position sensor and vane solenoid
• Updated HD bearings and 360 thrust bearing
• 800hp capable with proper fueling modifications
• 1 year warranty against manufacture defects
• Suggested injector size minimum 60% or bigger
• Not recommended for truck that does a lot of towing.
• For 04.5-10 Chevrolet Silverado/GMC Sierra HD 2500/3500

Frequently Asked Questions

Q: What comes in the turbo install kit?

A: All gaskets needed to physically install the turbo to the engine. They include: both up-pipe gaskets – both at the exhaust manifolds and exhaust housing, both drain gaskets, oil feed banjo, both coolant banjo’s.

Q: Do I need a new vane position sensor?

A: If you current sensor is not acting up, there’s generally no need to replace it. This can be easily swapped out later.

Q: My turbo is exploded. Will I still get my core money back?

A: Generally no. Core must be rebuildable. Anything exploded or lock tight you’ll generally get very little money back. Our suggestion would be look into purchase a new unit to avoid the core charge.

Q: I live outside the lower 48 and can not return the core due to cost, will you allow this?

A: This is fine, we just ask please tell as ahead of time.

Q: Does your pre-printed label apply to other countries?

A: No. It will only apply to the lower 48. If you are not in the lower 48 we will not include a return label if selected. You will be refunded when your core is returned.

Q: Do I have to purchase a UPS return label from you?

A: No, however most times we can save you money using our discount versus going into the store.

Q: Can I ship in my turbo ahead of time?

A: Not anymore. Too many units were shipped in and damaged in the process of coming to us resulting in lost cores.

Q: Do you offer powder coating?

A: No, due to the many variations in colors, however if you leave a note at check out that you are planning on having it done we will not glue the cover on. Sealant needed once completed can be purchased at GM part number #10-2010.