The RDS 04.5-10 LLY LBZ LMM Duramax Diesel reman 64mm is a stock appearing drop in turbo. This turbo is great for a truck with very little upgrades.
Features of the 64mm Duramax Turbocharger Reman:
- 64mm 6 blade proprietary compressor wheel
- 66mm 10 blade high flow turbine
- 100% drop in turbo
- Updated HD bearings and 360 thrust bearing
- 650hp capable with proper fueling modifications
- 1 year warranty against manufacture defects
- For 2004.5-2010 Chevrolet Silverado/GMC Sierra HD 2500/3500
Frequently Asked Questions
Q: What comes in the turbo install kit?
A: All gaskets needed to physically install the turbo to the engine. They include: both up-pipe gaskets – at the exhaust manifolds and exhaust housing, both drain gaskets, oil feed banjo, both coolant banjo’s.
Q: Do I need a new vane position sensor?
A: If you current sensor is not acting up, there’s generally no need to replace it. This can be easily swapped out later.
Q: My turbo is exploded. Will I still get my core money back?
A: Generally no. Core must be rebuildable. Anything exploded or lock tight you’ll generally get very little money back. Our suggestion would be look into purchase a new unit to avoid the core charge.
Q: I live outside the lower 48 and can not return the core due to cost, will you allow this?
A: This is fine, we just ask please tell as ahead of time.
Q: Does your pre-printed label apply to other countries?
A: No. It will only apply to the lower 48. If you are not in the lower 48 we will not include a return label if selected. You will be refunded when your core is returned.
Q: Do I have to purchase a UPS return label from you?
A: No, however most times we can save you money using our discount versus going into the store.
Q: Can I ship in my turbo ahead of time?
A: Not anymore. Too many units were shipped in and damaged in the process of coming to us resulting in lost cores.
Q: Do you offer powder coating?
A: No, due to the many variations in colors, however if you leave a note at check out that you are planning on having it done we will not glue the cover on. Sealant needed once completed can be purchased at GM part number #10-2010.